Sparyer Of Automatic Water System By Belt Conveyor
Basic Info
Model No.: ZP127
Product Description
Sparyer Of Automatic Water System Mining Equipment
Purpose
Automatic water spraying and dust removal device for mine dust control dust concentration sensor,heat release electric sensor, remote control, electric ball valve or electromagnetic valve components.Sparyer Of Coal Mining Equipment The device can be real-time check the dust concentration in the environment and whether there are pedestrians passing through the site Automatic Water System .And according to the field situation of automatic spraying water or stop spraying can improve the working environment and save water. Device spray mode and delay timeAnd other parameters can be conveniently set by the remote control.flexible use Can satisfy different field rings entry requirements. This device is suitable for the environment in which there is danger of explosion of gas and coal dust in coal mine.
main technical parameter
Rated Valtage | AC127V/12V |
Working Current | 600mA |
Operation Duration | 5s~520s |
Water Puressure | 0.2MPa~4.0MPa |
Sensor Operating Voltage | DC12V |
Sensor Operating Current | 2mA |
Technical Feature
Automatic water spraying and dust removal device for mine dust control
Dust concentration sensor,
Heat release
Electric sensor, remote control, electric ball valve or electromagnetic valve components. The device can be real-time
Check the dust concentration in the environment and whether there are pedestrians passing through the site.
And according to the field situation of automatic spraying
Water or stop spraying can improve the working environment and save water. Device spray mode and delay time
And other parameters can be conveniently set by the remote control.
Flexible use,Can satisfy different field rings Mine explosion-proof and safety sprinkler main machine (hereinafter referred to as the main machine)
Voltage adaptationHost adaption voltage fluctuation range:80% ~ 120%
The input signal The host has
Channel frequency signal input end and Road switch volume signal input terminal.
frequency input:200 ~ 1000 hz he pulse width is greater than or equal to 0.3 ms switching input: low level signal 0.8 V or less High level signal 3.6 V or higher
Dust concentration sensor (hereinafter referred to as dust concentration sensor)
Output signal format
Frequency:200 hz ~ 1000 hz, the pulse width is greater than 0.3 ms
Current:Ma 1 ~ 5 ma.
The two modes can be switched through the supporting remote transmitter.
Working voltage of dust sensor
The 12 V ~ 24 V
The maximum starting current and maximum working current of dust sensor should be less than 170 ma
jining dongda electromechanical co.,ltd have loaded in jining shandong province ,China .we professional making the coal feeder, mine pneumatic pump, wear resistant steel plate, mine car, production rescuer equipment, pneumatic mine car arrested stopper, air cannon, rolling cage equipment, coal mining prompt transportation, electrical machinery, agriculture machinery etc. best quaility ,best price is our service .
Product Categories : Pneumatic Mine Car Arrested Stopper > Electric Rail Car Arrester